Wheels & brake calipers cleaned with non corrosive cleaners; front of wheel, rear of spokes and inner barrel (Add-On Available, See Below).

Under arches pressure rinsed and door & boot shuts cleaned; engine compartment cleared of light soiling. 

Thorough hot pressure rinse followed by a hot foam pre-wash, removing lose grit from the paint surface. 

Safe wash process to remove remaining soiling; pH neutral shampoo, three buckets and premium wash mitt used.

Three-step decontamination process; removing tar spotting/adhesives, metallic fallout and claybar to restore a smooth finish.

Vehicle carefully towel dried; warm filtered air to blow out trapped water. 

Paintwork inspection carried out; paint thickness measurements taken to highlight sensitive areas and various lighting sources to highlight defects present. 

Single stage machine polish using a fine finishing polish to improve gloss levels.
NOTE: Deeper swirling and scratches will remain if too heavy for the fine finishing polish to remove. 

GYEON Q2WAX  protection applied to all painted areas. (Upgrade Available, See Below).

Exterior plastics dressed with a trim gel (Upgrade Available, See Below).

Internal and external glass cleaned.

Engine compartment dressed.

Interior vacuumed and dashboard dusted (Add-On Available, See Below).

Final inspection and wipe down using a quick detailer.